2-3KGF/CM2 Handheld Screw Lock Machine Automatic Feeding Blowing Type
Introduction
This manual handheld screw locking machine including two parts, first is the feeding system, it will order screws and distribute them through allocation, and then send them to the screwdriver via the pipe via blowing type feeding.Second, the electric or pneumatic screwdriver, it will lock the screws into the right place of the products. Compared with traditional screw locker, this automatic screwdriver machine is much more efficiency, just need one hand to take the screwdriver and location the screw hole. After locking one screw, another screw will automatically blowing feeding to the screw driver via the pipe, so the operator can work all the time, improve the production time and save labor.
Features
1. The whole machine is made of stainless steel, durable and stable.
2, The screw driver can optional based on the screws.
3, Blowing type feeding, the feeding system line up and distribute the screws, and send the screws to electric screwdriver through pipe.
4, Keep the screws clean, as the screws are automatically feeding, hands won't touch the screws, so the screws will always clean, it good for the products.
5, Operating platform, use the pedal to control electric screwdriver up and down.
6, Manual location the screws, using the electric screwdriver tightens the screw into product.
7, Much more efficiency than the traditional screw locking system, cause it automatic and continous feeding, only need one operator to hold the screw driver and location the holes.
Specfication
| Model | HS-ES802 |
| Screw capacity | M2*6/5000PCS |
| Efficiency | 50-70pcs/min(depends on the screw length) |
| Screw feeding speed | 0.5s/pcs (standard screw) |
| Feeding type | Blowing type |
| Air pressure | 2-3KGF/CM2 |
| Power supply | AC110V/220V, 50/60Hz |
| Power | 30W |
| Noise | less than 65dB |
| Weight | 35KG |
| Feeding device dimension | 370*250*190mm |
| Machine dimension | 420*250*260mm |
Application
1. Suitable screws: M1-M6.
2. Suitable Screw Head: for any universal type such as straight slot, cross, triangle, groove, trox, hexagonal, H head, etc.
3. Surface Treatment of screw: electrolytic nickel plating, color zinc plating, white zinc plating, and copper plating, etc.
4. Screw materials: iron, copper, stainless steel, etc.
5. Materials of products to be screwed: plastic, iron, aluminum, etc.
|
|
2-3KGF/CM2 Handheld Screw Lock Machine Automatic Feeding Blowing Type Images
|
